設定檔、設定與結束代碼

三張表，沒有一張是手寫的。它們是在建置本頁時從程式自己的內部登錄資料生成的，所以不可能說出程式並不具備的內容。

現成的設定檔

選擇其中一個，表單就會自動填好。短橫線表示該設定檔不改動那項設定。速度單位是千位元組每秒，乘以八才能與業者宣傳的數字比較。

設定檔	Loss	Losses in a row (burst)	Latency	Jitter	Download	Upload
Perfect network	-	-	-	-	-	-
Good WiFi	0.1 %	3	15 ms	5 ms	-	-
5G network	0.1 %	-	18 ms	8 ms	20480 KB/s	2560 KB/s
Home DSL (VDSL)	0.5 %	-	20 ms	8 ms	4096 KB/s	512 KB/s
LTE / 4G	0.3 %	-	30 ms	20 ms	4096 KB/s	1280 KB/s
Satellite (low orbit)	0.5 %	-	20 ms	15 ms	12288 KB/s	1536 KB/s
Distant server (another continent)	-	-	60 ms	5 ms	12288 KB/s	2048 KB/s
Weak WiFi	2 %	5	80 ms	40 ms	512 KB/s	256 KB/s
Cafe (crowded WiFi)	3 %	6	120 ms	90 ms	256 KB/s	96 KB/s
Congested home link (bufferbloat)	-	-	10 ms	5 ms	1024 KB/s	128 KB/s
Train / metro (tunnels)	2 %	6	50 ms	40 ms	1024 KB/s	256 KB/s
3G network	1 %	4	90 ms	60 ms	96 KB/s	32 KB/s
Foreign roaming	1.5 %	4	200 ms	80 ms	256 KB/s	64 KB/s
Satellite (geostationary)	1 %	4	340 ms	100 ms	3072 KB/s	384 KB/s
In-flight Wi-Fi	7 %	8	375 ms	150 ms	64 KB/s	24 KB/s
56k modem	0.5 %	-	100 ms	30 ms	5 KB/s	4 KB/s
Terrible network	10 %	15	300 ms	150 ms	32 KB/s	16 KB/s

選擇設定檔只會填寫各個欄位。在你點選START之前，網路上不會發生任何變化。

視窗和命令列接受的是同樣的設定。這是完整的列表，附有每項設定接受的單位和範圍。

參數	設定	單位	範圍
`--filter`	Traffic to modify	-	-
`--lan-mode`	LAN mode (local network only, no internet)	-	-
`--internet-only`	Internet only (no local network)	-	-
`--target`	Process	-	-
`--down`	Download	KB/s	0 - 1e+07
`--up`	Upload	KB/s	0 - 1e+07
`--buffer`	Buffer	ms	0 - 600000
`--latency`	Latency	ms	0 - 600000
`--jitter`	Jitter	ms	0 - 600000
`--spike-prob`	Spike chance	%	0 - 100
`--spike-ms`	Spike size	ms	0 - 600000
`--loss`	Loss	%	0 - 100
`--loss-burst`	Losses in a row (burst)	packets (0=off)	0 - 1000
`--corrupt`	Corruption	%	0 - 100
`--dup`	Duplication	%	0 - 100
`--asym`	Use separate values for upload	-	-
`--latency-up`	Latency up	ms	0 - 600000
`--jitter-up`	Jitter up	ms	0 - 600000
`--spike-prob-up`	Spike chance up	%	0 - 100
`--spike-ms-up`	Spike size up	ms	0 - 600000
`--loss-up`	Loss up	%	0 - 100
`--corrupt-up`	Corruption up	%	0 - 100
`--dup-up`	Duplication up	%	0 - 100
`--flap-period`	Period	s	0 - 86400
`--flap-down`	Downtime percent	%	0 - 100
`--dst-ip`	IP	-	-
`--dst-port`	Port	-	0 - 65535
`--ipv4-only`	IPv4 addresses only	-	-
`--ipv6-only`	IPv6 addresses only	-	-
`--block-ip`	IP	-	-
`--block-port`	Port	-	0 - 65535
`--block-reject`	Refuse blocked connections	-	-
`--syn-drop`	Dropped TCP SYN	%	0 - 100
`--max-size`	Max size (MTU)	B (0=off)	0 - 65535
`--nat-timeout`	NAT timeout	s (0=off)	0 - 86400
`--rst-prob`	TCP reset (RST)	%	0 - 100
`--rst-cooldown`	Hold reset	s	0 - 3600
`--rate-schedule`	Schedule (dur:down:up,...)	-	-
`--duration`	Run time	s	0 - 86400
`--row-limit`	Row limit	rows	0 - 1e+06
`--narrow-filter`	Capture only the targeted traffic	-	-
`--seed`	Seed	-	-

命令列永遠不會以堆疊追蹤收場。一次執行的每種結束方式都有一個編號，所以管線能區分應用失敗和工具無法啟動。